Ultimate Service Kits Catalog Atlas Copco GA90 GA110 GA132 GA160 Air & Water Cooled

Unloader Valve Service Kit for Atlas Copco Compressor
When searching for GENUINE Original spares for your Atlas Copco Air Compressors GA90 GA110 GA132 GA160 Air & Water Cooled, here you are at the right webpage. In the service kits parts numbers tables below, it includes the Air/oil filter kit, oil separator kit, screw element overhaul and exchange kit, CV-OSV kit for C146 (Check Valve-Oil Stop Valve Kit for C146, C190), Min.pressure valve kit, Unloading valve kit(C146), Gearbox overhaul kit(C146) and Maintenance kit 8000h or Every two years(C146), etc.

Atlas Copco GA90-110-132-160 Service Kits Parts Numbers List

The kits and Part numbers: 3001500627 Maintenance kit 4000h or yearly GA90,GA110; 3001500628 Maintenance kit 4000h or yearly GA132,GA160;3001100631 GA132 Maintenance kit 8000h or Every two years(C146) 14bar, 3001500632 Maintenance kit 8000h or Every two years(C190) GA132 7.5bar/8.5bar/10bar GA160 7.5bar/8.5bar/10bar; 3001500633 Maintenance kit 8000h or GA160 Every two years(C190) 14bar; 3001500630 GA90/GA110 Maintenance kit 8000h or Every two years(C146) 14bar; 2906095800 Unloading valve(C190) GA132 7.5bar/8.5bar/10bar GA160 7.5bar/8.5bar/10bar/14bar, etc.  More details are as below:
3001 5006 21 Air/oil filter kit 1621 4976 00 1 Nut
1621 7376 00 1 Heavy duty air filter element 1614 6957 00 1 Washer
1621 7378 90 2 Oil filter 9125 7289 00 1 Set screw
0653 1046 00 1 Flat gasket
0653 1100 00 1 Flat gasket
0661 1124 00 1 Flat gasket
0661 1000 25 2 Seal washer 2901 1089 00 Element overhaul kit(C146)
0661 1000 27 3 Seal washer GA90 7.5bar/8.5bar/10bar/14bar
0663 1000 31

 

3001 5006 24

1

 

1

Seal washer

 

Oil separator kit

GA110

GA132

0663 2111 77

 

 

1

7.5bar/8.5bar/10bar/14bar

14bar

O-ring

GA90,GA110 0508 1310 00 2 Bearing
0663 2106 17 1 O-ring 0512 0510 12 1 Bearing
0663 2109 45 2 O-ring 1616 7149 00 1 Wave spring
1614 9054 99 1 Oil separator elelment 0512 0510 13 1 Bearing
1616 7148 00 1 Wave spring
3001 5006 25 1 Oil separator kit 1616 7266 00 1 Clamping ring
 

0663 2106 17

 

1

GA132,GA160

O-ring

0147 1409 03 1 Cap screw
0663 2109 45 2 O-ring 2906 0973 00 Element overhaul kit(C190)
1614 9056 99

 

2906 0960 00

1

 

1

Oil separator element

 

CV-OSV kit for C146

GA132

GA160

0663 2103 25

 

 

1

7.5bar/8.5bar/10bar

7.5bar/8.5bar/10bar/14bar

O-ring

GA90 7.5bar/8.5bar/10bar/14bar 0663 2108 14 1 O-ring
GA110 7.5bar/8.5bar/10bar/14bar 0663 7135 00 1 O-ring
GA132 14bar 0508 1101 07 2 Bearing
1622 0977 00 1 Gasket 0211 1362 00 2 Bolt
1622 9639 00 1 Check valve 1616 7355 00 2 Bearing
0661 1000 44 1 Seal washer 0147 1409 03 2 Bolt
1622 5662 00 1 Spring 1616 7353 00 2 Wave spring
1622 0796 00 1 Spring 0663 2106 20 2 O-ring
0661 1000 44 1 Seal washer
0661 1000 25 1 Seal washer 2906 0971 00 1 Element exchange kit(C146)
0661 1000 27

 

2906 0961 00

1

 

1

Seal washer

 

CV-OSV kit for C190

GA90

GA110 GA132

7.5bar/8.5bar/10bar/14bar

7.5bar/8.5bar/10bar/14bar 14bar

GA132 7.5bar/8.5bar/10bar 0663 2109 78 1 O-ring
GA160 7.5bar/8.5bar/10bar/14bar 0663 2111 46 1 O-ring
1623 0385 00 1 Check valve 0663 2107 37 1 O-ring
2254 8075 00 1 Spring 1622 0977 00 1 Gasket
1623 1767 00 1 Spring 0661 1000 27 1 Seal washer
0663 2108 12 1 O-ring 0337 0009 77 1 Paralley key
0663 2106 20 1 O-ring 0211 1409 00 1 Cap screw
0663 2106 15 1 O-ring 0663 7138 00 1 O-ring
0663 3116 00 1 O-ring
0661 1000 25 1 Seal washer
0661 1000 32 1 Seal washer
3001 5006 26 1 Min.pressure valve kit
0663 2106 58 1 O-ring
2906 0972 00 1 Element exchange kit(C190)
GA132 7.5bar/8.5bar/10bar 2906 1000 00 1 Cooler kit
GA160 7.5bar/8.5bar/10bar/14bar GA90-110W
0663 2114 07 1 O-ring 1092 0147 00 4 O-ring
0663 2114 23 1 O-ring 1092 0147 00 4 O-ring
0663 2124 00 1 O-ring 0663 2106 20 2 O-ring
0663 2109 68 1 O-ring 0663 2106 11 2 O-ring
0663 2108 12 2 O-ring 0663 2106 12 3 O-ring
0663 2106 20 1 O-ring
0663 2106 15 1 O-ring 2906 1001 00 1 Cooler kit
0663 3116 00 1 O-ring GA132-160W
0663 1000 27 1 Seal washer 1092 0147 00 8 O-ring
0337 8350 00 1 Paralley key 1092 0147 00 4 O-ring
0147 1407 03 1 Bolt 0663 2106 20 1 O-ring
0663 2106 11 4 O-ring
2906 0957 00 1 Unloading valve kit(C146) 0663 2106 12 4 O-ring
GA90 7.5bar/8.5bar/10bar/14bar
GA110 7.5bar/8.5bar/10bar/14bar 2906 0969 00 1 Gearbox overhaul kit(C146)
GA132 14bar GA90/110 7.5bar/8.5bar/10bar/14bar
0663 7151 00 1 O-ring GA132 14bar
1622 3694 80 1 assembly blow off valve GA160 7.5bar/8.5bar
1622 3690 00 1 Bushing 0611 1000 27 1 Seal washer
1622 3689 00 1 Guidance tape 0211 1325 00 4 Cap screw
1622 3691 00 1 Quadring C146 0337 0009 74 1 Parallel key
1622 3182 00 1 Guide 0504 0110 01 1 Ball Bearing
1622 3183 00 1 Seal 0508 1158 01 1 Bearing
1622 3185 00 1 Spring 0337 8352 00 1 Paralley key
0663 2107 37 2 O-ring 2906 0968 00 1 Shaft seal kit
1623 1785 00 1 Valve
0663 7154 00 1 O-ring 2906 0970 00 1 Gearbox overhaul kit(C190)
0211 1957 79 1 Screw GA132 7.5bar/8.5bar/10bar
0661 1000 40 1 Washer GA160 10bar/4bar
0663 2111 46 1 O-ring 0611 1000 27 1 Seal washer
0211 1325 00 1 Cap screw
2906 0958 00 1 Unloading valve(C190) 0337 0009 74 1 Parallel key
GA132 7.5bar/8.5bar/10bar 0504 0100 08 1 Roller bearing
GA160 7.5bar/8.5bar/10bar/14bar 0508 1158 01 1 Bearing
0663 2114 23 1 O-ring 0337 8352 00 1 Parallel key
0663 2108 13 1 O-ring 2906 0968 00 1 Shaft seal kit
1622 3694 80 1 assembly blow off valve
0661 1000 29 1 Seal washer 3001 5006 22 1 Flexmaster joint
0663 2109 49 1 O-ring GA90,GA110
1623 0540 00 1 Guidance tape 0291 1114 00 2 Locknut
1623 0904 00 1 Bushing 0300 0276 03 4 Washer
0663 2114 22 1 O-ring 1614 9115 00 4 Rubber joint
0517 1424 00 1 Bearing ball 1614 8926 00 4 Absorber
0663 2111 66 1 O-ring
3001 5006 23 1 Flexmaster joint
2906 0566 00 1 Cooler kit GA132,GA160
GA90-160 0291 1114 00 2 Locknut
0663 2106 15 1 O-ring 0300 0276 03 4 Washer
0663 2106 17 1 O-ring 1614 9064 00 4 Rubber joint
0663 2109 68 4 O-ring 1614 8926 00 4 Absorber
0663 2106 19 1 O-ring
3001 5006 27 1 Maintenance kit 1202 5869 03 1 Thermostatic valve
4000h or yearly 2901 0749 00 1 Drain valve kit
GA90,GA110 3001 5006 21 1 Air.oil filter kit
0661 1000 25 1 Seal washer 2906 0960 00 1 CV-OSV kits
0663 2106 18 1 O-ring 3001 5006 26 1 Min press valve kit
0663 2106 20 1 O-ring 2906 0957 00 1 Unloading valve kit
2254 8075 00 1 Spring 3001 5006 24 1 Oil separator kit
3001 5006 21 1 Air/Oil filter kit 3001 5006 22 1 Flexmaster joint kit
3001 5006 28 1 Maintenance kit

4000h or yearly GA132,GA160

3001 1006 31

 

GA132

Maintenance kit 8000h or

Every two years(C146) 14bar

0661 1000 25 1 Seal washer 0663 2107 77 1 O-ring
0663 2106 18 1 O-ring 1202 5869 03 1 Thermostatic valve
0663 2106 20 1 O-ring 2901 0749 00 1 Drain valve
2254 8075 00 1 Spring 3001 5006 21 1 Air/oil filter
3001 5006 21 1 Air/Oil filter kit 2906 0960 00 1 CV-OSV kits
3001 5006 26 1 Min press valve kit
2906 0957 00 1 Unloading valve kit
2906 0578 00 1 Seal washer kit 3001 5006 25 1 Oil separator kit
0653 0500 08 3 Flat Cu gasket 3001 5006 23 2 Flemaster joint kit
0653 1046 00 3 Flat Cu gasket
0653 1062 00 12 Flat Cu gasket 3001 5006 32 Maintenance kit 8000h or
0653 1100 00 3 Flat Cu gasket Every two years(C190)
0653 1124 00 3 Flat Cu gasket GA132 7.5bar/8.5bar/10bar
0653 1165 00 3 Flat Cu gasket GA160 7.5bar/8.5bar/10bar
0653 1189 00 3 Flat Cu gasket 0663 2107 77 1 O-ring
0653 1227 00 3 Flat Cu gasket 1619 7560 00 1 Thermostatic valve
0653 9078 00 3 Flat Cu gasket 2901 0749 00 1 Drain valve kit
0661 1000 25 9 Seal ring 3001 5006 21 1 Air/oil filter kit
0661 1000 27 12 Seal ring 2906 0961 00 1 CV-OSV kits
0661 1000 29 6 Seal ring 3001 5006 26 1 Min press valve kit
0661 1000 31 3 Seal ring 2906 0958 00 1 Unloadig valve
0661 1000 36 3 Seal ring 3001 5006 25 1 Oil separator kit
 

3001 5006 29

 

Maintenance kit 8000h or

3001 5006 23 2 Flexmaster joint kit
 

GA90

Every two years(C146)

7.5bar/8.5bar/10bar

 

3001 5006 33

 

Maintenance kit 8000h or

GA110

0663 2107 77

 

1

7.5bar/8.5bar/10bar

O-ring

 

GA160

Every two years(C190)

14bar

1619 7560 00 1 Thermostatic valve 0663 2107 77 1 O-ring
2901 0749 00 1 Drain valve kit 1202 5869 00 1 Thermostatic valve
3001 5006 21 1 Air.oil filter kit 2901 0749 00 1 Drain valve kit
2906 0960 00 1 CV-OSV kits 3001 5006 21 1 Air/oil filter kit
3001 5006 26 1 Min press valve kit 2906 0961 00 1 CV-OSV kits
2906 0957 00 1 Unloading valve kit 3001 5006 26 1 Min press valve kit
3001 5006 24 1 Oil separator kit 2906 0958 00 1 Unloadig valve
3001 5006 22 1 Flexmaster joint kit 3001 5006 25 1 Oil separator kit
3001 5006 23 2 Flexmaster joint kit
3001 5006 30 

GA90/GA110

Maintenance kit 8000h or Every two years(C146) 14bar
0663 2107 77 1 O-ring

As one of the main and fast-growing professional world top compressors and genuine spare parts distribution network in China, Air Compressors Trade Service (official business name: Chengdu Pudding Mechatronic Co.CPMC China) team represent you with the the ultimate service kits with part numbers for these Atlas Copco heavy duty compressors. 

For Atlas Copco GA90-160 Service kits or any other Spare Parts Price, Stock status and availability, shipping time frame, please Submit a Quick “RFQ”, we will Answer you soon!

    Full Name

    City

    Phone

    Company Name

    Detailed Shipping Add

    Quick RFQ, Pls provide P/N, compressors name plate, etc.

    Please attach 1 file up to 2MB if you have.

    99 thoughts on “Ultimate Service Kits Catalog Atlas Copco GA90 GA110 GA132 GA160 Air & Water Cooled

    1. Mr Finn says:

      Dear Sir!

      Please take a look and help us with your suggestions.

      A5E01237899
      A-Nr: 119977/09

      Looking forward to hearing from you soon.

      Nice day to you.

      • CPMC Air Compressors Guide says:

        Thank you Mohammed for leaving the message, well currently Kaeser compressors parts are still restricted for distribution and we welcome your RFQs on other main compressors brands such as Atlas Copco, Sullair, INGERSOLL RAND (IR, CompAir, Doosan, Gardner Denver, etc). Thank you again.

    2. Knowledge Sourcing says:

      Modern centrifugal compressors are equipped with sophisticated control systems that allow for precise regulation of air pressure and flow. These systems enable adaptive performance based on real-time demand, further improving efficiency and performance.

    3. Ali says:

      Dear :sir/madam

      I hope this email finds you well.
      I am  Eng. Ali yousee   representing  Power Tech for Engineering & construction.
      We are interested in establishing a business partnership with your company to fulfill the requirements
      We would like to get a quote for 4 complete units  of air compressor and dryers with  control systems according to following details:
      – Atlas copco air compressor screw oil injected Model:GA132-7.5 bar,  4 units
      -Atlas copco air compressor screw oil injected Model:GA110-7.5 bar ,4units
      – Atlas copco twin tower heatless adsorption dryer Model:CD480+ / 4 units 
      – Atlas copco twin tower heatless adsorption dryer Model:CD400+ , 4units
      – Atlas copco Equalizer pro.4 (EQ) control system up to 4 compressors
      – others Accessories for installation

      Best regards

      Ali Yousee
      Power Tech for Engineering and construction
      Yemen,sanaa Almatar street
      Tel:+96707873010
      P.o.box:35059
      Phon : +967777605085
      Whatsup:+967737378715
      Email: info@uptech.com.ye/info@hyzpower-s.com.ye

      • CPMC Air Compressors Guide says:

        Thanks Ali for your message on our website, we well received and our team should have quoted to you via email. We welcome your RFQs and orders. Looking forward to supporting your business with our strong supply chain worldwide. Tony, funder of CPMC!

    4. matheus says:

      I want to buy several Sandvik parts, I currently buy from Türkiye and would like more reliable suppliers

      • CPMC Air Compressors Guide says:

        Thank you for your message RFQ on our website, we welcome your inquiries and orders on Sandvik, Epiroc drilling and mining equipment parts, and Atlas Copco, Ingersoll Rand, CompAir, Doosan, Gardner Denver, Sullair air compressors spare parts. Please always feel free to write an email to us when you have RFQs and orders demand. Thank you, Tony, funder of CPMC.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    CPMC uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.