Knowledge & Tips

Knowledge & Tips, Tools Knowledge, Working Tools

CPMC Explained the Types of Woodworking Tools and The Applications

Posted on 2021-07-272021-08-14 by CPMC Air Compressors Guide

27
Jul

As growing to be a large online distributor based in China, Chengdu Pudding Mechatronic Co.(CPMC) has a wide scope of working experiences in air compressors, woodworking tools industry and China/Tibet inbound tourism, each and everyone of our staff has rich life stories and comprehensive experiences in working in factories, marketing, Alibaba & Made-in-China international trade online sales constancy, inbound tourism sales consultancy, etc.

Continue reading →

Air Compressor Maintenance Tips and Operation Instructions Well Explained

Posted on 2021-07-262021-08-14 by CPMC Air Compressors Guide

26
Jul

How to maintain air compressors? What should we pay attention to when operating air compressors? Here let Chengdu Pudding Mechatronic Co. (CPMC) provide the advices on air compressors maintenance and instructions on how to operate the system. For air compressors fundamental maintenance, a mechanical person should take care of the regular checking / maintenance work below. It is imperative to do so to find the potential issues earlier and once there is something not going properly, we need to fix it well before it gets worse. 1) Read the User Manual; 2) Tighten the Nuts and Bolts; 3) Clean the Intake Valves; 4) Inspect the Hoses; 5) Change the Air Filter; 6) Drain Condensate From the Tanks; 7) Clean the Compressor Fuel Tank; 8) Inspect the Air Compressor Shutoff System. Here below lets focus on 4 main section for an air compressor maintenance. Air Compressors Maintenance Tips – 4 Main Sectors 1. Replace the air filter; 2. Replace the oil filter; 3. Replace the oil and gas separator; 4. Replace lubricating oil; Specific Air Compressors Operation Methods The following operations must be performed only when the power is turned off and there is no pressure in the machine) 1. Replace the air filter Remove the screw at the end of the air filter cover, remove the tail of the cover, remove the air filter locking screw, take out the air filter, install the new filter, and reinstall the filter and cover in the reverse steps. 2. Replace the oil filter Use a special tool to lock the bottom of the filter and turn it forward to unscrew the filter. Use a clean cloth to clean the bottom of the filter and apply a little oil. Apply a little oil to the seal ring of the new oil filter and install the new filter. And lock it with special tools. 3. Replace The Compressor Air/Oil Filter The method is the same as replacing the oil filter. 4. Replace lubricating oil When the oil temperature is between 30 and 60℃, the viscosity will decrease and it will not burn your hands. At the same time, it will drain the residual oil of the unit. Therefore, if the oil is cold when changing the oil, first turn it on and run it for 2-3 minutes. When changing the oil, make sure that the unit is pressure-free before proceeding. First, disassemble the oil filling nut of the oil-gas separation barrel and prepare the residual oil with a suitable container. Open the oil drain valve under the barrel, and turn the head pulley by hand from time to time to drain the oil stored in the head. After the oil is completely drained, close the drain valve. Inject new lubricating oil, and turn the head pulley by hand from time to time to facilitate the suction of oil into the pipe and the machine head. After immersing the oil level mirror, the oil fills 2~3cm (this is an empirical value, the actual oil level needs to be observed when the machine is turned on and loaded). After filling the oil, install and lock the oil nut, and remove the air intake Valve, inject a small amount of lubricating oil from the air inlet of the machine head, and the amount of oil is only two-thirds of the submerged rotor. Install the air inlet valve. Clean the surface of all parts of Henan air compressor. Three, test machine After power-on, directly start the air compressor, listen to whether there is any abnormal noise, observe whether there is oil leakage, and see whether the oil level is appropriate (the oil level should be observed during loading, and the position should be 1/ of the oil level mirror. 2~2/3) Otherwise, put more and less make up. After confirming that there is no abnormality, install the side panel and the rear side panel, and you are done. Air Compressors Trade (Chengdu Pudding Mechatronic Co. Company Ltd) Air Compressors Trade Service is online distributor for air compressors and compressed air products in Chengdu, southwest China. Not like most machinery distributors, our mission is not to sell as many air compressors or spare parts as we can. Our philosophy is to partner with more and more clients to help them salvage net profit by lowering their import cost. As is known to all that China is one of the HUGE manufature centers of the world. Every year tens of thousands of air compressors and compressors related parts go abroad from China. But due to the information gap and the lack of professionalism in air compressors services, most of the international buyers feel it is hard to find a reliable supplier with professional service and the most competitive prices. CPMC is growing to be China’s large online distributor offering BETTER prices than any of those compressors agents on Alibaba or Made-in-China because of the expensive commission, advertisement cost and transaction fee which is aggressively or outrageously charged by those platforms due to their namely high traffic. However our own networks enable us to provide the best prices and products to our customers. Learn more about Chengdu Air Compressors Dealer.

Continue reading →

Tools Knowledge

Types of Woodworking Tools – Well Explained by Chengdu ACT Machinery & Electronics Co.,Ltd

Posted on 2021-07-192021-08-14 by CPMC Air Compressors Guide

19
Jul

compressed air products as well as some industrial working tools (Such as woodworking blades tools) in Mainland China. As part of a comprehensive service network, our company can provide service capabilities from Asia to Europe, Africa, North America, South America, Australia, and New Zealand.

Continue reading →

Tools Knowledge

Precautions for Use of Woodworking Circular Saw Blades – ACT Knowledge Base

Posted on 2021-07-182021-08-14 by CPMC Air Compressors Guide

18
Jul

Use of Woodworking Circular Saw Blades Safety Warning Please be sure to wear helmets, gloves, protective glasses, etc. according to labor safety regulations. Sharp serrations may cause accidental injury. The cutter head is easy to heat during use, please do not use it in an environment with fire or explosion hazards. ◆ The machine where the saw blade is installed must have necessary safety protection measures, otherwise it may cause accidental injury. ◆ Only qualified persons who understand the safety instructions can be allowed to install saw blades and operate equipment. 【before use】 Confirm whether the saw blade is suitable for the installed machine and the material to be cut? When it is not suitable, the saw blade may produce chipping and other abnormalities. Is there any foreign matter attached to the cutter head? Are there gaps in the cutter head? And is there any deformation or cracks in the Taijin? Do not use if any. ◆ The machine should have good performance, and the spindle accuracy should meet the national standards. The spindle accuracy directly affects the cutting effect and the life of the saw blade. ◆ Please use flanges that are free from wear, deformation, foreign matter adhesion, and the left and right outer diameters are the same. Fix it firmly, avoid loosening and shaking. ◆ The size of the flange is about 1/3 of the diameter of the saw blade. Using a flange smaller than the standard diameter will severely damage the saw blade, please do not use it. Specification of saw blade diameter and standard flange diameter: Saw blade diameter mm Standard flange diameter mm 205mm 80mm 255mm 100mm 305mm 100mm 355mm 120mm Saw blade diameter mm Standard flange diameter mm 405mm 120mm 455mm 140mm 505mm 160mm 610mm 160mm If you use a flange diameter other than the standard, the saw blade parameters will be changed, please consult the sales personnel for details. Do not exceed the speed (Nmax) shown on the saw blade table metal. The speed on the table metal is calculated based on the diameter of the flange. Please pay attention to the direction of rotation of the saw blade. Reverse rotation of the saw blade may cause the blade to be missing and fly away and cause injury. Please make sure that the saw blade is installed firmly to prevent the saw blade from turning on the machine spindle and causing deformation or abrasion of the center hole of the saw blade. If the saw blade has not been installed properly, please do not remove the sawtooth protective rubber sleeve, otherwise the cutter head may be damaged due to the installation. 【Using】 Do not touch the rotating saw blade. There is a direct risk of serious injury or being involved. When pushing the material by hand, please stand in a fixed place to keep it stable. Do not stand in front of the rotating saw blade, as there is a danger of flying out. When cutting metal materials, please ensure sufficient cooling, otherwise the resulting high temperature may cause the saw teeth to fall off and cause damage. If there are abnormal noises, vibrations, deformation of the cut surface, etc. during cutting, please stop the operation directly for inspection. Check whether the material to be cut is mixed with hard foreign matter, otherwise the saw teeth may be damaged or rebound may cause injury. Please note that there may be short materials or foreign objects falling into the saw blade in the machine saw, which will cause the saw teeth to fall off or break. When the cutting quality is unacceptable or the sawing noise increases, please re-grind the saw blade. Re-grinding and re-processing Please go to the professional circular saw blade processing point when the cutter head needs to be re-grinded, the metal and the center hole need to be modified. When re-grinding, the original angle of the blade should be maintained in the new state of the saw blade for grinding, otherwise it will cause loss due to poor grinding. The coated teeth on the cutter head are different from the usual circular saw blades, and the grinding method is also different. Please pay special attention. After re-grinding, please confirm whether the cutter head is still falling off, missing, or not ground, which may cause poor cutting or injury. The reprocessing (reaming) of the saw blade is recommended not to exceed the original hole 20mm, otherwise it will cause loss of tension and the cutting effect of the saw blade will be affected. Air Compressors Trade is the fastest growing online distributor for world class high-quality air compressors such as Atlas Copco, Ingersoll Rand, Sullair, Quincy, etc and the compressed air products as well as some industrial working tools in Mainland China. As part of a comprehensive service network, our company can provide service capabilities from Asia to Europe, Africa, North America, South America, Australia, and New Zealand. To work and deal with Air compressors Trade (Chengdu ACT Machinery & Electronics Co.,Ltd), means cost-cost-efective, efficiency, reliability and profession. Thanks for visiting our website and we are looking forward to serving you soon.

Continue reading →

Login

Register