Atlas Copco LP
Genuine Atlas Copco Oil-sealed rotary vane vacuum pumps catalog from Chinese supplier
11
Aug
Aug
This is a catalog of Atlas Copco oil seal rotary vane vacuum pumps from Chinese suppliers, which includes GVS 16A, GVS 25A, GVS 40a, GVS 60A, GVS 100A, GVS 200A, GVS 300A, GVS 630A and other products. If you have any needs, please feel free to contact us.
Genuine Atlas Copco Oil-sealed rotary vane vacuum pumps catalog from Chinese supplier
| Part number | Name Remarks |
| 3002 6016 00 | Seals kit GVS 16A |
| – | Non return screw |
| – | Flat gasket |
| 71237600 | O-ring |
| 71413470 | O-ring |
| 71415640 | Spring |
| 71042990 | Antisuckback valve |
| 71419340 | O-ring |
| 71217590 | O-ring |
| 71413240 | Flat gasket outlet |
| 71416430 | Flat gasket |
| – | O-ring |
| 3002 6016 01 | Maintenance kit GVS 16A |
| – | Filter VK31/2 Only for pump produced before Aug, 2018 |
| 71413240 | Flat gasket outlet |
| 71413270 | Friction spring cartridge |
| 3002601602 | Oil separator element |
| 71416440 | Oil return filter |
| – | O-ring |
| 3002 6016 03 | Repair kit GVS 16A |
| – | Filter VK31/2 |
| 71413150 | Vane (set of 3) |
| – | Valve stop |
| 71416370 | Valve plate |
| 71413270 | Friction spring cartridge |
| 3002 6016 02 | Oil separator element |
| 71416440 | Oil return filter |
| 71219480 | Oil sight glass |
| 3002 6016 00 | Seals kit GVS16A |
| EK6702951 | Gasballast unit |
| EK6528992 | Front end plate |
| 71413100 | Rotor |
| 71416450 | Pump cylinder |
| 71413440 | Dirt trap |
| 71413110 | Inlet adapter |
| 71418080 | Inlet flange NPT |
| 71413120 | Inlet flange G3/4 |
| 71422140 | Reduction piece NPT |
| 95124 | Reduction piece G3/4 |
| 71256380 | Plug + o-ring G3/4 |
| – | Oil casing unit |
| 71078740 | Ball valve |
| 71413160 | Flange exhaust |
| 71415300 | Supporting plate |
| E6526450 | Motor 3ph EUR |
| E6526454 | Motor 1ph USA |
| E6526452 | Motor 1ph EUR |
| 3001 1701 94 | Polyester inlet filter element |
| Oil | |
| 1630 2044 01 | Vacuum Vane Fluid 32-Mineral oil(1L) |
| 1630 2047 01 | Vacuum Vane Fluid Plus 32-Synthetic oil(1L) |
| 3002 6016 04 | Seals kit GVS 25A |
| 71418070 | GB screw kit |
| 71237720 | O-ring |
| 71237600 | O-ring |
| 71415640 | Spring |
| 71042990 | Antisuckback valve |
| 71419340 | O-ring |
| 71217590 | O-ring |
| 971423480 | Flat gasket |
| O-ring | |
| 71419730 | Flat gasket |
| 971433220 | Float valve assembly |
| 71217580 | O-ring |
| 3002 6016 05 | Maintenance kit GVS 25A |
| 971423480 | Flat gasket |
| 71420370 | Spring unit |
| 3002601606 | Oil separator element |
| 71217580 | O-ring |
| 3002 6016 07 | Repair kit GVS 25A |
| 71418060 | GB silencer |
| 71416290 | Vane (set of 3) |
| 71418580 | Valve stop |
| 71418570 | Valve plate |
| 71420370 | Spring unit |
| 3002601606 | Oil separator element |
| 71219480 | Oil sight glass |
| 3002 6016 04 | Seals kit GVS25A |
| 971422940 | End plate with GB |
| 71416310 | Rotor |
| 71420220 | Pump cylinder |
| 71413110 | Inlet adapter |
| 71413440 | Dirt trap |
| 71416170 | Intake flange G 3/4 |
| 71418080 | Intake flange NPT 3/4 |
| 95124 | Reduction + O-Ring G 3/4-G 1/2 |
| 71422140 | Reduction NPT 3/4- NPT 1/2 |
| 71256380 | Plug Slotted |
| – | Oil casing |
| 71420140 | Plug plus o-ring |
| 71078740 | Oil drain tap |
| 71416220 | Exhaust flange G 3/4 |
| 71418090 | Exhaust flange NPT 3/4 |
| 71416240 | Supporting plate |
| E6526456 | Motor 1ph Eur |
| E6526457 | Motor 1ph USA |
| 971422980 | Motor 3ph wide |
| 71414030 | Rubber mount D20X15 M6 |
| 71418020 | Rubber mount D20X15 M6 |
| 3001 1701 94 | Polyester inlet filter element |
| Oil | |
| 1630 2044 01 | Vacuum Vane Fluid 32-Mineral oil(1L) |
| 1630 2047 01 | Vacuum Vane Fluid Plus 32-Synthetic oil(1L) |
| 3001170141 | Seals ki+B106:B128t +B106:B147GVS 40A |
| ES6509598 | Radial shaft seal (Set 5) |
| – | O-ring |
| 71237320 | O-ring |
| 71417060 | Membrane |
| 71417260 | O-ring |
| 71237440 | O-ring |
| ES6509620 | Radial shaft seal (Set 5) |
| 71421340 | O-ring |
| 71015460 | Intake valve |
| 71217660 | O-ring |
| 71237130 | O-ring |
| 71417330 | O-ring |
| ES971456791 | Gasket |
| 71217410 | O-ring |
| 971454030 | Gasket |
| 971433220 | Float valve assembly |
| 971427110 | Pin seal (Set 5) |
| 71217980 | O-ring |
| 71212400 | Spring |
| 3001 1701 55 | Maintenance kit GVS 40A |
| 71217410 | O-ring |
| 71420370 | Spring unit |
| 3001170183 | Oil separator element |
| 971454030 | Gasket |
| 3001 1701 69 | Repair kit GVS 40A |
| – | Rotor ring |
| – | Rotor ring |
| – | Rotor ring |
| 71420810 | Vane (set of 3) |
| 3001 1701 90 | Oil filter |
| – | Screw |
| – | Washer |
| 71420840 | Valve stop |
| G71418831 | Valve plate |
| 71219480 | Oil level glass |
| 71420370 | Spring unit |
| 3001 1701 83 | Oil separator element |
| 3001 1701 41 | Seals kit GVS 40A |
| 971424850 | Module cover |
| 971424860 | Protective cover |
| 71420450 | End plate with GB |
| 71420760 | Rotor with rings |
| 71420400 | Pump cylinder |
| 71416640 | Intake flange |
| 71407290 | Filter DN45 |
| 71416650 | Intake flange G1 1/4 |
| 71417390 | Intake flange NPT 1 1/4 |
| – | Oil casing unit |
| 71073040 | Plug + O-ring |
| 71256380 | Plug + O-ring G ¾ |
| 71420440 | Exhaust flange G1 ¼ |
| 71422000 | Exhaust flange NPT 1 ¼ |
| – | Plug + gasket G 2 |
| 71418960 | Oil filter holder |
| 71421240 | Motor 3ph Wide |
| 71416840 | Fan |
| 71416830 | Fan Cover |
| 71212640 | Rubber mount Kit DN30 H25 |
| 3001 1701 95 | Polyester inlet filter element |
| Oil | |
| 1630 2045 01 | Vacuum Vane Fluid 68-Mineral oil(1L) |
| 1630 2049 01 | Vacuum Vane Fluid Plus 100-Synthetic oil(1L) |
| 3001 1701 42 | Seals kit GVS 60A |
| GM6514707 | Radial shaft seal (Set 5) |
| – | O-ring |
| 71237320 | O-ring |
| 71417060 | Membrane |
| 71417260 | O-ring |
| 71417240 | O-ring |
| ES6514709 | Radial shaft seal (Set 5) |
| 71421340 | O-ring |
| 71015460 | Intake valve |
| 71217660 | O-ring |
| 71237130 | O-ring |
| 71417330 | O-ring |
| ES971456801 | Gasket |
| 71217410 | O-ring |
| 971454030 | Gasket |
| 971433220 | Float valve assembly |
| 971427110 | Pin seal |
| 71217980 | O-ring |
| 71212400 | Spring |
| 3001 1701 56 | Maintenance kit GVS 60A |
| 71217410 | O-ring |
| 71420370 | Spring unit |
| 3001 1701 84 | Oil separator element |
| 971454030 | Gasket |
| 3001 1701 70 | Repair kit GVS 60A |
| – | Rotor ring |
| – | Rotor ring |
| – | Rotor ring |
| – | Rotor ring |
| 71416750 | Vane (set of 3) |
| 3001 1701 90 | Oil filter |
| – | Washer |
| – | Screw |
| 71417100 | Valve stop |
| G71417091 | Valve plate |
| 71219480 | Oil level glass |
| 71420370 | Spring unit |
| 3001 1701 84 | Oil separator element |
| 3001 1701 42 | Seals kit GVS 60A |
| 71417020 | Module cover |
| 71417080 | Turbine |
| 971423420 | End plate with GB |
| 71417400 | Rotor with Rings |
| 71416600 | Pump cylinder |
| 71416640 | Intake flange |
| 71407290 | Filter DN45 |
| 71416650 | Intake flange G1 1/4 |
| 71417390 | Intake flange NPT 1 1/4 |
| – | Oil casing unit |
| 71073040 | Plug + O-ring G 1 |
| 71078740 | Oil drain tap Bs G3/4 M/F |
| 71420440 | Exhaust flange G1 1/4 |
| 71422000 | Exhaust flange NPT 1 1/4 |
| Plug + gasket G 2” | |
| 71422130 | Motor 3ph wide |
| 71416840 | Fan |
| 71416830 | Fan cover |
| 71212640 | Rubber mount (set of 4) DN30 H25 |
| 3001 1701 96 | Polyester inlet filter element GVS 60A |
| Oil | |
| 1630 2045 01 | Vacuum Vane Fluid 68-Mineral oil(1L) |
| 1630 2049 01 | Vacuum Vane Fluid Plus 100-Synthetic oil(1L) |
| 3002 6016 12 | Seals kit GVS 100A |
| 71417570 | Radial shaft seal |
| – | O-ring |
| 71237320 | O-ring |
| 71417060 | Membrane |
| 71417260 | O-ring |
| 71417240 | O-ring |
| 71421340 | O-ring |
| 71015460 | Intake valve |
| 71217660 | O-ring |
| 71237130 | O-ring |
| 71418910 | Gasket |
| 71417260 | O-ring |
| 71417330 | O-ring |
| ES971456811 | Gasket |
| – | Flat gasket |
| 971433220 | Float valve assembly |
| – | Pin seal |
| 71217410 | O-ring |
| 71217980 | O-ring |
| 71212400 | Spring |
| 3001 1701 57 | Maintenance kit GVS 100A |
| – | Flat gasket |
| 3001 1701 84 | Oil separator element |
| 71420370 | Spring unit |
| 71217410 | O-ring |
| 3002 6016 13 | Repair kit GVS 100A |
| – | Rotor ring |
| 71418750 | Vane (set of 3) |
| 71418780 | Toothed ring |
| – | Screw |
| – | Washer |
| 71418840 | Valve stop |
| G71420831 | Valve |
| 3001 1701 91 | Oil filter |
| 71219480 | Oil level glass |
| 3001170184 | Oil separator element |
| 71420370 | Spring unit |
| 3002 6016 12 | Seals kit GVS 100A |
| 71417020 | Module cover |
| 71417080 | Turbine |
| 971423930 | End plate with GB |
| G6525980 | Rotor with rings |
| 971472280 | Pump cylinder |
| 71416640 | Intake flange |
| 71407290 | Filter DN45 |
| 71416650 | Intake flange G1 1/4 |
| 71417390 | Intake flange NPT 1/4 |
| 71418950 | Grid |
| – | Oil casing unit |
| 71073040 | Plug + O-ring G 1 |
| 71078740 | Oil Drain Tap |
| 71418900 | Exhaust flange G1 1/4 |
| 71421780 | Exhaust flange NPT 1 1/4 |
| 71418790 | Coupling housing |
| 71418980 | Pump coupling |
| 71418990 | Motor coupling |
| 971423680 | Motor 3ph Wide |
| 71024220 | Rubber mount DN50 H30 |
| 71418960 | Oil filter holder |
| – | Plug + gasket G 2” |
| 3001 1701 96 | Polyester inlet filter element GVS 100A |
| Oil | |
| 1630 2045 01 | Vacuum Vane Fluid 68-Mineral oil(1L) |
| 1630 2049 01 | Vacuum Vane Fluid Plus 100-Synthetic oil(1L) |
| 3001 1701 44 | Seals kit GVS 200A |
| – | Gasket |
| – | Flat gasket |
| – | O-ring |
| – | O-ring |
| – | Flat gasket |
| 971463030 | Float valve assembly |
| – | Gasballast membrane |
| – | O-ring |
| – | Flat gasket |
| – | Flat gasket |
| – | Spring |
| – | Relief valve seal |
| – | O-ring |
| – | Intake valve |
| – | O-ring |
| GM71223182 | Radial shaft seal (Set 2) |
| – | O-ring |
| 3001 1701 58 | Maintenance kit GVS |
| – | Flat gasket |
| – | O-ring |
| 3001 1701 92 | Oilfilter |
| – | Relief valve seal |
| – | O-ring |
| 3001 1701 85 | Oil separator element |
| – | Spring unit |
| 3001 1701 72 | Repair kit GVS 200A |
| – | Valve plate set |
| – | Valve stop |
| 3001 1701 92 | Oil filter |
| 3001 1701 85 | Oil separator element |
| – | Toothed ring |
| – | Needle bearing (outer) |
| 71412000 | Vane (set of 3) |
| Needle bearing (inner) | |
| Rotor ring | |
| Oil level glass | |
| 3001 1701 44 · | Seals kit GVS 200A |
| 95129 | Gas ballast valve |
| 71401350 | Front end plate |
| 71400990 | Rotor with rings |
| 71401200 | Oil Tube |
| 971466220 | Fitting DN12 |
| 71401430 | Connecting element |
| 71436580 | Pump cylinder |
| 71401210 | Oil tube |
| 71401360 | Rear bearing flange |
| EK71400771 | Half coupling |
| 71076170 | Turbine |
| EK6507189 | Oil cooler |
| 71407020 | Turbine housing |
| EK71436621 | Turbine housing (incl.69,73,97,98) |
| EK6519349 | Motor 3ph Wide |
| – | Oil casing cover with switch |
| 71259410 | Rubber mount set |
| 71078740 | Oil drain tap |
| GK71060854 | Exhaust flange |
| – | Oil casing unit |
| 3001 1701 97 | Polyester inlet filter element |
| Oil | |
| 1630 2045 01 | Vacuum Vane Fluid 68-Mineral oil(1L) |
| 1630 2049 01 | Vacuum Vane Fluid Plus 100-Synthetic oil(1L) |
| 3001 1701 45 | Seals kit GVS 300A |
| – | Antisuckback valve |
| – | Spring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| 71417010 | Shaft seal |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| 971433220 | Float valve assembly |
| – | Gasballast membrane |
| – | O-ring |
| – | Seal |
| – | Plug |
| – | O-ring |
| 3001 1701 59 | Maintenance kit GVS 300A |
| 71073040 | Oil fill plug |
| 3001 1701 86 | Oil separator element with bypass |
| – | O-ring |
| – | O-ring |
| 71436210 | Compressor spring |
| 3001 1701 75 | Repair kit GVS 300A |
| 971445970 | Coupling Eur Iec Motors |
| 971446030 | Coupling US Nema Motors |
| 971464910 | Bearing kit |
| 971446880 | Vane (set of 3) |
| 971464940 | Valve and valve stop kit |
| 3001 1701 92 | Oil filter |
| 971460230 | Oil sight glass |
| 3001 1701 86 | Oil separator element with bypass |
| 71436210 | Compressor spring |
| 3001 1701 45 | Seals kit GVS 300A |
| 971460710 | Cover |
| 971460700 | Radiator |
| 971445920 | Turbine |
| EK6503195 | Turbine |
| 971467690 | End Plate Kit |
| 971464130 | Gas ballast 3 Flows |
| 971445930 | Rotor kit |
| 971464930 | Rubber feet kit |
| EK971461271 | Stator |
| 971457690 | Anti suckback valve |
| EK971458911 | Intake flange us NPT2’’ |
| 971457700 | Motor 3ph wide |
| 71078740 | Oil drain tap Bs G3/4 M/F |
| EK971460541 | Exhaust plate NPT2 Kit |
| EK971469641 | Orient exhaust deflector |
| 3001 1701 97 | Polyester inlet filter element |
| Oil | |
| 1630 2045 01 | Vacuum Vane Fluid 68-Mineral oil(1L) |
| 1630 2049 01 | Vacuum Vane Fluid Plus 100-Synthetic oil(1L) |
| 3001 1701 47 | Seals kit GVS 630A |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | Shaft seal (set) |
| – | Antisuckback valve |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| – | Gasballast membrane |
| – | O-ring |
| 971433220 | Float valve assembly |
| – | O-ring |
| – | O-ring |
| – | O-ring |
| 971425990 | Spring |
| 3001 1701 61 | Maintenance kit GVS 630A |
| – | O-ring |
| 71436210 | Spring |
| 3001 1701 86 | Oil separator element with bypass |
| 3001 1701 93 | Oil filter |
| 3001 1701 75 | Repair kit GVS 630A |
| – | Washer |
| – | Screw |
| 71249660 | Disc for rotor |
| – | Ballbearing (set of 2) |
| 971424540 | Vane( set of 3) |
| 971425950 | Race bushing |
| – | Ball bearing |
| – | Spring ring |
| 971425920 | Valve stop |
| 971425900 | Valve plate |
| 971425910 | Valve plate |
| 71040760 | Filter element |
| – | Spring ring |
| – | Ball bearing |
| – | Race bushing |
| 71029600 | Oil level glass |
| 3001 1701 86 | Oil separator element with bypass |
| 3001 1701 93 | Oil filter |
| – | Magnet |
| 971425870 | Clip |
| 3001 1701 47 | Seals kit GVS 630A |
| 971430740 | Base frame |
| 71078740 | Oil drain tap Bs G3/4 M/F |
| 971425210 | Exhaust deflecter |
| 971425710 | Cover |
| 971425130 | Demister support unit |
| 971425750 | Cover under oil casing |
| 971425860 | Cover |
| 971432390 | Frond hood air cool |
| 971432800 | Oil cooler |
| 971434740 | Oil pipe cooler to oil casing |
| 971434730 | Oil tube cooler to stator |
| 971425110 | Oil cooler base |
| 971431620 | Fan D350 |
| 971431890 | V-Belt pulley DN250 |
| 971465350 | Pulley unit |
| 971424070 | Unit stretcher |
| E971472058 | Wide range motor |
| 971424020 | Rear end plate |
| 971424000 | Stator |
| 971426060 | Gas ballast |
| 971424980 | Motor support |
| 971424970 | Motor support |
| 971432640 | Lifting plug |
| 971424480 | Rotor |
| 971424010 | Front end plate |
| 971437760 | Oil hold back steel sheet |
| 971425270 | Cover frond oil casing |
| 971430550 | Intake flange 100 |
| 71242230 | Collar flange100 |
| 971432410 | Hood rear |
| 971432420 | Hood |
| 971432510 | Hood (Upper) |
| 71403350 | Set of rubber feet DN100 |
| 3001 1701 98 | Polyester inlet filter element |
| 3001 1701 38 | Belt set GVS 630A Europe/World |
| Oil | |
| 1630 2045 01 | Vacuum Vane Fluid 68-Mineral oil(1L) |
| 1630 2049 01 | Vacuum Vane Fluid Plus 100-Synthetic oil(1L) |
| 2906909200 | ZH9Q00/3 4000HR MAINTKIT |
| 2906909300 | ZH9Q00/3 8000HR MAINTKIT |
| 2906910700 | ZH9000/1500035T24000HR KIT |
| 2906904600 | ZH4000MAINTENANCEKIT000HRS |
| 2906904700 | ZH4000MAINTENANCE KIT8QQ0HRS |
| 2906904800 | ZH4000MAINTENANCEKIT24000HR |
Contact information
Export DepartmentTony Phone: +86 18080158435
For Genuine Atlas Copco Oil-sealed rotary vane vacuum pumps Price and Availability in China, Please Submit a Quick RFQ, we will answer you soon!
Learn more about Air Compressors Trade – Chengdu Pudding Mechatronic Co.CPMC distribution network!
Dear, Good day
We kindly ask you to send us by email information about the price and
other conditions for the supply of the material described below:
Item Description
04 – UNTS
PNEUMATIC CYLINDER
APPLICATION AIR COMPRESSOR LT15 30
1503037780-J ATLAS COPCO
VERY IMPORTANT: (INFORM)
HS CODE, Delivery Time, Taxes.
Payment conditions
Technical information: Datasheet/Drawing
Send Certificates (if applicable)
Weight and dimensions estimate
King regards,
Thank you Dan for your comments and RFQ leaving on our website, our team will check and quote to you on Monday via email. If you need any other genuine parts for Atlas Copco, Epiroc drilling and mining equipment parts, Ingersoll Rand, CompAir, Gardner Denver, Doosan, Sullair, etc, feel free to contact with us.
Добрый день просим рассмотреть возможность поставки фильтров на компрессор ZH 7000-6-7(р/комплекты,фильтры, сепаратор, клапана)
Dear Sir or madam, thanks, please send us by email with the part numbers for ZH7000 Atlas Copco Air Compressors, we are looking forward to quoting you for your RFQs.
Добрый день, жду сообщений по поставке расходников
Thank you, please provide the part numbers, air compressor name plate by email to us: parts@aircompressorstrade.com.
Уважаемый Господин или Госпожа
Может ли ваша компания поставлять детали для центробежных воздушных компрессоров Ingersoll Rand? Для таких моделей, как Centac 400, C700E и т. д., а также запасных частей для безмасляных воздушных компрессоров Atlas Copco. Если да, то как быстро вы можете отправить нам продукцию и насколько надежна ваша продукция, если мы принимаем только оригинальные запасные части?
Dear Sir or madam, Thank you very much for leaving comment on our website. Our company offer MANY GENUINE ORIGINAL parts for all top brands of air compressors like Atlas Copco, Ingersoll Rand, CompAir, Doosan, Gardner Denver, and yes, we do serve centrifugal air compressors spare parts. You can compare our prices if based on 100% Genuine original parts. Thanks and hope we can communicate in email via English if possible. Kind regards, Team from CPMC, China.
I would like to request a Parts List Manual for Atlas Copco G55, We are planning to purchase PM parts for our compressor.
Your immediate response is highly appreciated.
Thanks!
Robert Arano
PDEC Co. (Purtlev Dynamics Engineering Company)
86 Hemedez Coumpound, Brgy. Sala Cabuyao Laguna Philippines
(049) 560 6264
Dear Robert, can you please send email to us with the compressor nameplate and so we can try to check the related user manual and see if we can get the part numbers for the PM parts. our email address: parts@aircompressorstrade.com (miss Wendy) or inquiry@aircompressorstrade.com (miss JoJo). Thank you for your inquiry and best regards, CPMC service team!
S No Description Part Number
1 Cooler Kit 3001531121
2 O-RING 0663210968
3 Seal Washer 0661100038
4 RING INTERNAL 1635051200
5 PROFILE, 1635051400
6 SEAL GASKET 1635051500
7 O RING 1623172600
8 COOLER AFTER 1635051900
9 CORE COOLER, AIR 1635051600
10 CORE COOLER, OIL 1635127300
11 O RING 0663210612
12 O RING 0663210968
Can someone please share prices and availibility.
Dear Kamran
Good morning and happy new Year 2025! We well received your message and our team will check and quote to you asap in this holiday period.
Kind regards
CPMC Team